WiFi Connection to a Network
©
Brultech Research Inc.
11
www.brultech.com
Figure 9
3.
Refer to Figure 10
Select “STA Interface Setting” from the left menu
Enter your network’s WiFi name (SSID) in the “AP’s SSID” box
Set the “Security Mode” to match that of your wireless network
Set the “Encryption Type” to match that of your wireless network
Enter your WiFi network’s security “Pass Phrase”
Click “Apply”
Figure 10
4.
OPTIONAL:
You can assign a name to the GEM so that it is readily identifiable when viewing all
of the network connected devices on a router’s setup page. This is done by entering this user
assigned name in the “Hostname” box in Figure 10, then clicking “Apply”.