Bruker minispec TC3, User Manual

Page: 27 / 46

Maintenance
H148851_4_004 27
• Remove the old filter. If necessary, use your fingers to pull it out of the opening.
Figure 8.4: Removing and Installing the Filter
• Install the new filter.
• Close the filter drawer.
• Turn the power back on.
8.3 Cleaning Instructions
To clean the exterior surfaces of the device, complete the following steps:
• Shut down and unplug the device.
• Wipe the exterior surfaces only using a towel dampened with a lab‑grade cleaning agent.
• Repeat the previous step, using a towel dampened with clear water.
• Dry the device exterior using a dry towel.
WARNING
Shock Hazard from Liquids
Liquid coming in contact with electrical components may result in a serious injury through
shock.
u
Do not allow any liquid to enter the device cabinet other than as intended through the
specified tubing, or come into contact with any electrical components.
u The device must be thoroughly dry before you reconnect power, or turn the device on.