Bruker BVTE3900, Technical Manual

Page: 13 / 41

Technical Manual Version 003 BRUKER 13 (41)
BVTE3900 front view
BVTE3900 front view 2.3
Figure 2.4. BVTE3900 front view
Installation 2.4
Open the cover top of the system, cables and hoses are inside.
The BVTE3900 includes flexible hoses approximately 7 meters long. Connect the
two water hoses to the high temperature probe. The hoses are marked «IN» and
«OUT», connect them on the probe plugs with the same mark.
Connect the mains cable.
Connect the Pt100 sensor on probe.
Connect the heater to probe and BVTE3900.
Connect compressed air on gas in nipple.The compressed air (approx. 6 bar) is
for driving the venturi vacuum pump and draining the liquid circuit.
Connect the vacuum pump hose to the probe.
1
2
3
4
PROBE TEMPERATURE
HEATER LED
WATER LEVEL
VACUUM PUMP FLOW INDICATOR
1
2
3
4