Bruker BMPC/2, Technical Manual

Page: 87 / 136

87 Z31823_00_05
12 Configuration (administrator)
The configuration of the BMPC/2 is limited to the Administrator and Bruker service per-
sonnel.
For optimal operation of the BMPC/2 several system parameters must be adjusted. In
addition, some local adjustments are needed concerning the telephone system that is
used and the error alerts that are required.
During installation all settings for the magnet system are adjusted using the
"Magnet
Setup Wizard" . Likewise, the laboratory environment settings are adjusted using the
"Customer Setup Wizard" .
Changes to an existing configuration can be made in the "The Options Menu" .
12.1 Magnet Setup Wizard
The Magnet Setup Wizard is used to change the magnet dependent data, including all
limit adjustments and adjustments for the magnet heater.
Important: The Magnet Setup Wizard will overwrite the previous
setup!
To access the Magnet Setup Wizard select
Tools - Magnet Setup
from the main menu.
Press the
Next
button to the next step.
Figure 12.1 Magnet Setup Step 1
Select the
magnet type
Enter the data
for the
glass carbon
sensors T1 + T2
These values will
be automatically
calculated