Bruker BioSpin NMR BVT3200, Technical Manual

Page: 33 / 56

Technical Manual Version 002 BRUKER BIOSPIN 33 (55)
Authorised functions
ES - Error Status 4.8.6
Write
Read
Table 4.4. Error status description
Syntax : EOT 0 0 0 0 STX ES val ETX BCC
Response : Always NACK.
Syntax : EOT 0 0 0 0 ES ENQ
Response : STX ES val ETX BCC
Description : Allows the user to get information about the last six errors.
Explanations : At each «ES» request, the last error code is sent and then
reset. If more than six errors are memorised, the oldest error
code is replaced by the new one. To erase all errors, one must
send «ES» requests until response is «ES0».
The returned value «Val» is the error code. The different error
codes are given in the table below.
VAL SIGNIFICATION COMMENT
0
NOERROR no error in command
1
SYNTAX unknown command/syntax error
2
checksum checksum error
3
erasefail flash eprom erase error
4
programmfail flash eprom program error
5
wrongrecordtype no intel hex record
6
wrongaddress program address out of range
7
wrongchecksum checksum error intel hex
8
wrongtransmissioncheck wrong eof record
9
wrongdatacount byte counter error
10
noappsw no application software
11
nobbis no BBIS available
12
bbiscs1 BBIS checksum error block 1
13
bbiscs2 BBIS checksum error block 2
14
bbiscs3 BBIS checksum error block 3
15
bbiscs4 BBIS checksum error block 4