Bruker BioSpin minispec mq10, User Manual

Page: 67 / 76

Dismantling and Disposal
E1400011_1_001
67
12 Dismantling and Disposal
Following the end of its operational life, the unit can be returned to Bruker for safe disposal. If
this is impractical, the unit should be disposed of safely as prescribed by local environmental
regulations.
Installation, initial commissioning, retrofitting, repairs, adjustments or dismantling of the
device must only be carried out by Bruker Service or personnel authorized by Bruker.
Damage due to servicing that is not authorized by Bruker is not covered by your warranty.
12.1 Dismantling
Before starting dismantling:
1. Shut down the device and secure to prevent restarting.
2. Physically disconnect the power supply from the device; discharge stored residual energy.
3. Remove consumables, auxiliary materials and other processing materials and dispose of
in accordance with the environmental regulations.
4. Clean assemblies and parts properly and dismantle in compliance with applicable local
occupational safety and environmental protection regulations.
12.2 Disposal
If no return or disposal agreement has been made, send the dismantled components for
recycling as prescribed by local environmental regulations.
• Scrap metals.
• Send plastic elements for recycling.
• Dispose of packaging material in accordance with the relevant applicable legal
requirements and local regulations.
• Sort and dispose of other components in accordance with their material composition.
NOTICE
Danger to the environment from incorrect handling of pollutants!
Incorrect handling of pollutants, particularly incorrect waste disposal, may cause serious
damage to the environment.
u
Always observe local environmental regulations regarding handling and disposal of
pollutants.
u Take the appropriate actions immediately if pollutants escape accidentally into the
environment. If in doubt, inform the responsible municipal authorities about the damage
and ask about the appropriate actions to be taken.