ENGLISH OUS indications
Page 10 of 50
OTH-SEM-IFU-OUS-0359 Rev I
2.10
Warranty
This manual is intended to provide instructions on the proper use of the Provizio SEM Scanner.
It should be used in conjunction with the appropriate training.
To request repair or replacement under warranty, purchasers should contact their local
Customer Service provider. Warranty conditions may differ in some countries. Contact your
Customer Service provider for warranty terms.
Using the instrument in a manner other than that described in this manual may result in improper
function. Warranty is limited to defects and materials that can be attributed to a fault or defect
within the Provizio SEM Scanner.
Warranty does not extend to any Warranted Products or parts thereof: (a) that have been
subject to misuse, neglect or accident, (b) that have been damaged by causes external to the
Warranted Product, (c) that have been used in violation of the Bruin Biometrics LLC Instructions
for Use, (d) on which the serial number has been removed or made illegible, (e) that have been
modified by anyone other than Bruin Biometrics LLC or its authorised service centre, unless
authorised prior to such service by Bruin Biometrics LLC, (f) that are equipment sold as used or
(g) that are exposed to agents listed in Table 1, below. Table 1 is not an exhaustive list of agents
which may compromise the integrity of the Provizio SEM Scanner.
Severe effect
–
NOT recommended
Benzene
Cyclohexane
Kerosene
Nitric Acid
–
70%
Carbon tetrachloride
Ethyl Chloride
Trichloroethylene
Perchloroethylene
Chlorobenzene
Freon
Lacquer
Toluene
Chloroform
Petrol, unleaded
Naphtha
Xylene
Table 1. Agents that should never be used on the Provizio SEM scanner
Note
–
no distributor, dealer or other party is authorised to make any warranty on behalf of
Bruin Biometrics LLC or to assume for Bruin Biometrics LLC any other liability with respect to
the Provizio SEM Scanner.
The contents of this User Manual do not constitute a warranty.