9
LINK PASSENGER manual EN Version 1.0 October 2020
Maintenance / Inspection
Maintenance
The LINK PASSENGER harness is designed to take high loads and stress. Proper maintenance will maximise the
lifetime of the product. The harness should be periodically inspected for signs of wear, and damaged components
must be repaired or replaced by the manufacturer or an authorised workshop. Any repairs performed by anyone else
will deem the harness uncertified. Only original parts should be used. Spares can be ordered from your BGD dealer.
•
Keep the harness clean of dirt, oils and corrosive substances.
• Take particular care that no dirt gets into the mechanics of the buckles and that all moving parts of the buckle
are running freely. If necessary, the buckles can be lightly oiled.
•
Avoid excessive exposure to UV, heat and humidity.
•
Always pack the harness dry, and store in a cool, dry environment.
• Never drag the harness across the ground.
•
If the harness is dirty, clean it only with water and a brush. Chemical cleaners will damage fabric and webbing.
•
Avoid high temperatures (for example: inside a closed car in summer).
•
Avoid unnecessary long exposure to sunlight. Ultraviolet radiation destroys the structure of the material.
•
Avoid contact with saltwater or acid liquids.
Maintenance / Inspection
