LDSBus Isolated IO Controller Datasheet
Version 1.1
Document Reference No.: BRTSYS_000009 Clearance No.: BRTSYS#005
Copyright © BRT Systems Pte Ltd
6
5
Isolated IO Controller Configuration and Installation
to access the LDSBus Configuration Utility guide on
how to configure the device name, device address and termination settings before using it in your
application.
5.1
Connection Diagram
Figure 2 illustrates the connection of the LDSBus Isolated IO Controller (LDSBus Device) to the
LDSBus. Please visit
to view the full device application, setup and
installation guides.
Figure 2 - LDSBus Isolated IO controller - Connection Diagram
Setup Instructions:
1.
Connect the first LDSBus HVT-Junction to any of the LDSBus Host Systems using a
RJ45(CAT5e) cable.
2.
Connect the configured LDSBus Isolated IO controller to the LDSBus HVT-Junction as shown in
Figure 2.
3.
If there is more than one LDSBus HVT-Junction, chain them together as shown in Figure 2.
4.
Enable terminator on the last device in LDSBus.