PARTS TO BE INSTALLED
Handlebar Wind Deflector
On each side:
1. Insert arm into deflector.
msi2015-004-001_b
2. Position trim tab inside slot on deflector.
msi2015-004-002_b
3. Slide trim into place along deflector and over
arm.
msi2015-004-003_b
4. Secure deflector assembly using K50 x 20 Torx
screw.
msi2015-004-004_b
5. Cut the handlebar wiring locking ties.
6. Place the arm against the handlebar.
7. Install the clamp with screws but do not tighten
yet.
mbl2015-002-005_a
8. Set the deflector horizontally and tighten
screws to specification.
mbl2015-002-006_a
TIGHTENING TORQUE
Wind deflector screws
3.5 N•m (31 lbf•
in
)
9. Secure handlebar wiring with new locking ties.
WARNING
Turn handlebar completely from side to side
making sure that wind deflectors do not inter-
fere with handlebar controls and accessories
(throttle lever, brake lever, emergency engine
stop switch, windshield, etc).
PREDELIVERY
2016-5
7 / 13
