BRP ROTAX 914 Series, Operator'S Manual

Page: 35 / 96

3) Standard operation
Topics in this chapter
3.1 Daily checks ......................................................................................... 2
3.2 Before engine start ................................................................................ 5
3.3 Pre-flight checks ................................................................................... 5
3.4 Engine start .......................................................................................... 6
3.5 After engine start ................................................................................... 8
3.6 Take-off .............................................................................................. 10
3.7 Take-off (standard - with activated servo motor of the
TCU) .................................................................................................. 10
3.8 Take-off (as per RTCA DO 178 B - with deactivated servo motor of the
TCU) .................................................................................................. 10
3.9 Cruising ............................................................................................. 11
3.10 Engine shut-off .................................................................................. 11
3.11 Cold weather operation ....................................................................... 11
Introduction
To warrant reliability and efficiency of the engine, meet and
carefully observe all the operating and maintenance
instructions.
The following description of procedures depends on the
respective type of installation in the aircraft and shall therefore
only be seen functionally.
NOTE
The control elements mentioned in this chapter are only
symbolic and should support the understanding of the
procedures. The execution of control elements is in the
responsibility of the aircraft manufacturer.
Effectivity: 914 Series
Rev. 0 BRP-Rotax Page 3-1
August 01 2019