BRP Rotax 4-TEC 150, Operator'S Manual

Page: 11 / 64

7

W
ARRANTY
I
NFORMATION
For all emission-related warranty claims, BRP is limiting the diagnosis and repair of emission-
related parts to the authorized Rotax Jet Propulsion dealers, unless for emergency repairs as
required by item 2 of the following list.
As a certifying manufacturer, BRP will not deny emission-related warranty claims based on
any of the following:
1) Maintenance or other service BRP or BRP’s authorized facilities performed.
2) Engine/equipment repair work that an operator performed to correct an unsafe, emergency
condition attributable to BRP as long as the operator tries to restore the engine/equipment
to its proper configuration as soon as possible.
3) Any action or inaction by the operator unrelated to the warranty claim.
4) Maintenance that was performed more frequently than BRP specify.
5) Anything that is BRP fault or responsibility.
6) The use of any fuel that is commonly available where the equipment operates unless BRP
written maintenance instructions state that this fuel would harm the equipment’s emission
control system and operators can readily find the proper fuel. See maintenance information
section and fuel requirements section.
EMISSION-RELATED WARRANTY PERIOD
The emission-related warranty is valid for the following period whichever comes first:
For model: Rotax 4-TEC150 ECT, Rotax 4-TEC 200 ECT and Rotax 4-TEC 250 ECT.
For model: Rotax 4-TEC 150 (these models are not allowed in the state of California)
HOURS MONTHS
Exhaust emission-related
components
480 36
Evaporative emission-
related components
N/A 24
HOURS MONTHS
Exhaust emission-related
components
175 30
Evaporative emission-
related components
N/A 24