BRP Lynx 49 Ranger PRO 600R E-TEC Operator'S Manual Download Page 280

Page: 280 / 368

278

6. Remove the spark plugs and spray storage oil for 5 seconds in

each cylinder.

7. Spin the drive pulley for three complete revolutions by hand to dis-

tribute the storage oil to coat the cylinder walls.

8. Reinstall the spark plugs and tighten to specification.

Tiig

htte

niin

g tto

orrq

Spark plug

28 ± 2 Nm (21 ± 1 lbf-ft)

E--T

C E

giin

e -- 4

4..5

5”” a

d 7

7..2

2”” D

Diig

giitta

all D

Diissp

plla

ayy

Follow these simple steps.

To engage the procedure, do the following:

1. Place the vehicle in a well ventilated area.
2. Start the engine and let it run at idle speed until it reaches its oper-

ating temperature (watch the coolant temperature on the display or
verify the rear heat exchanger becomes warm).

3. Push the SET (S) button to select odometer mode.

STORAGE

Summary of Contents for Lynx 49 Ranger PRO 600R E-TEC

















































































































































































































































































































































































Search results

Summary of Contents for Lynx 49 Ranger PRO 600R E-TEC

Reviews:

BRP Lynx 49 Ranger PRO 600R E-TEC, Operator'S Manual, Page: 280 / 368

Search results

Summary of Contents for Lynx 49 Ranger PRO 600R E-TEC

Reviews: