BRP EVINRUDE E-TEC BE50DPLABA, Service Manual

Page: 382 / 422

S–10
SAFETY
After repair on any part of the fuel system, pressure test engine portion of fuel system as shown:
•
Make sure silencer and its gaskets are on engine and drain hose is in place.
•
Air silencer mounting screws are special lock screws. Use only the special screws.
When Storing:
When Running:
Squeeze until
bulb feels hard
Check for leaks
under engine cover
If tank cap has an air
vent valve, make sure
it is closed.
Whenever possible, remove
hose from outboard and from
tank.
Store hose around ears
of tank. This way,
gasoline is trapped in
tank and not in the hose,
where it might leak onto
the floor if the hose
deteriorates.
If gasoline tank is stored
indoors, do not put it in a room
having an appliance with a
pilot light or where electrical
appliances or switches (which
may spark) will be used.
Carburetor air intake
silencer will catch and
hold fuel which may flood
into engine if carburetor
float sticks.