UNCRATING
WARNING
The moving deck suspension is attached un-
der tension (spring-loaded). Before releasing
tension:
– Clean moving deck of any objects and
tools.
– Do not use pneumatic or electric tools for
removing moving deck retaining screws.
– Adhere strictly to following procedure.
1. Lift seat by pressing the rear latch and moving
seat to the rear and them upwards.
sbl2009-004-006_a
1. Rear latch
2. Remove cable free end from hole.
3. Put a knot at the end of the cable to prevent it
from going into the hole.
sbl2009-004-007_a
1. Cable free end
2. Hole
4.
Slowly
unscrew rear retaining screw (Do not
use pneumatic or electric tools).
sbl2009-004-008_a
1. Rear retaining screw
5.
Carefully
lift rear tab upwards using a flat
screwdriver.
sbl2009-004-009_a
1. Rear tab
NOTE:
After lifting the rear tab, the cable will slide
into the hole and the moving deck will move up-
wards. Ensure that the cable is free of tension be-
fore removing the front screw.
6. Remove front retaining screw.
sbl2009-004-010_a
1. Knot
2. Front retaining screw
PREDELIVERY
2009-3
5 / 23
