UNCRATING
NOTE:
If washers are not present, you will
need 6 stainless steel flat washer (P/N 234
061 600).
sbl2009-004-004_a
1. Rear retaining brackets
USA and Canadian models
7. Remove boarding step from vehicle by cutting
locking ties.
sbl2009-004-005_a
1. Locking ties
International Models
Remove the gauge support cover then cut locking
ties to release the boarding step.
sbl2009-004-101_a
1. Gauge support cover
All Models
8. Ensure that the predelivery kit in the storage
compartment includes the following items.
sbl2009-004-051_a
ITEM DESCRIPTION (P/N )
QTY
M8 x 25 screw (P/N 207 382 560)
1
Refer to
RELEASING MOVING DECK
subsection.
2
M8 washer (P/N 250 200 011)
2
Refer to
RELEASING MOVING DECK
subsection.
2
Plastic cap (P/N 291 002 950)
3
Refer to
RELEASING MOVING DECK
subsection.
2
Battery hardware (P/N 250 000 282)
4
Refer to
BATTERY
subsection.
1
M6 x 45 bolt (P/N 207 164 560)
5
Refer to
BATTERY
subsection.
2
M6 washer (P/N 234 062 600)
6
Refer to
BATTERY
subsection.
2
M6 nut (P/N 232 561 200)
7
Refer to
BATTERY
subsection.
2
M6 x 25 screw (P/N 250 000 076)
8
Refer to
BOARDING STEP
subsection.
6
Releasing Moving Deck
NOTE:
For transportation purpose, the moving
deck suspension has been completely com-
pressed and secured at the factory using cable.
Make sure to release tension and remove secur-
ing cable from moving deck suspension prior to
working on the vehicle.
4 / 23
2009-3
PREDELIVERY
