Browning SC2039002-BN-00, Instruction Manual

Page: 7 / 24

SC2039002-BN-00 - ENG Page 7 of 24 20121206-V1
LP Tank Filling

Use only licensed and experienced dealers.

LP dealer must purge tanks before filling.

Dealer should NEVER fill LP tank more than 80% of LP tank volume. Volume of
propane in tanks will vary by temperature.

A frosted regulator indicates gas overfill. Immediately close LP tank valve and call LP
gas dealer for assistance.

Do not release liquid propane (LP) gas into the atmosphere. This is a hazardous
practice.

To remove gas from LP tank, contact an LP dealer or call a local FIRE DEPARTMENT
for assistance. Check the telephone directory under
“GAS Companies” for nearest
certified LP dealers.
LP Tank Exchange

Many retailers that sell appliances offer you the option of replacing your empty LP
tanks through an exchange service, Use only those reputable exchange companies
that inspect, precision fill, test and certify their cylinders. Exchange your tank only for
an OPD safety feature-
equipped tanks as described in the “LP Tank” section of this
manual.

Always keep new and exchanged LP tanks in upright position during use, transit or
storage.

Leak test new and exchanged LP tanks BEFORE connecting to appliance.
LP Tank Leak Test
For your safety

Leak test must be repeated each time LP tank is exchanged or
refilled.

Do not smoke during leak test.

Do not use an open flame to check for gas leaks.

Appliance must be leak checked outdoors in well-ventilated area,
away from open flames or sparks.
Use a clean paint brush and 50/50 soap and water solution.
Use mild soap and water. Do not use household cleaning agents. Damage to gas train
components can result.
Brush soapy solution onto all metal seams and entire valve area.
Regulator Hose Assembly Check

Before each use, check to see if there is evidence of abrasion, wear, cuts or leaks. The
hose must be replaced prior to the appliance being put into operation. The
replacement hose assembly must be that specified by the manufacturer.
WARNING
If “growing” bubbles appear, do not use or move the LP tank. Contact an LP gas supplier or
your fire department.