background image

SC2039002-BN-00 - ENG                                                    Page 24 of 24                                                    20121206-V1 

 

LIMITED WARRANTY 

 

1.  Manufacturer warrants this Product to be free from defects in workmanship and materials for a period of 

Ninety (90) days from the date of purchase, PROVIDED claims are submitted, in writing, with proof of 
purchase. 

2.  If any part of this item fails because of a manufacturing defect within the Limited Warranty Period, 

Manufacturer offers to replace such part(s) provide that such parts have not been improperly repaired, 
altered, or tampered with or subject to misuse, abuse or exposed to corrosive conditions. This Limited 
Warranty is, however, subject to certain limitations, exclusions, time limits and exceptions (Hereinafter 
“Conditions”) as listed below. Read these Conditions carefully. 

3.  This Limited Warranty shall be limited to the replacement or repair of any part(s) which Manufacturer 

determines, after reasonable examination, to have been defective at the time of manufacturing and 
manufacturer’s obligation(s) shall be limited to replacement, if any, of defective part(s) which shall be 
shipped at Original Purchaser’s expense to Original Purchaser’s designated shipping address. 

4.  This Limited Warranty is given to and covers the 

ORIGINAL PURCHASER ONLY 

and such coverage 

terminates Ninety (90) days from the date of purchase.

 

5. 

DAMAGE LIMITATION WARNING:        

IN NO EVENT SHALL MANUFACTURER BE LIABLE FOR ANY 

INCIDENTIAL OR CONSEQUENTIAL DAMAGES, INCLUDING (BUT NOT LIMITED TO) LOSS OF USE 
OF THE PRODUCT, LOSS OF TIME, LOSS OF FOOD

INCONVENIENCE, EXPENSE FOR TRAVEL, 

TRANSPORTATION LODGING EXPENSES,

 LOSS BY DAMAGE TO PERSONAL PROPERTY OR 

LOSS OF INCOME, PROFITS OR REVENUE

6. 

MANUFACTURER’S OBLIGATION:

 

Manufacturer’s liability shall be limited to the delivery of a good, 

merchantable Product and, if necessary, the repair or replacement, at manufacturer’s option, of any 
defective part or unit. 

7. 

TRANSFER LIMITATIONS:

 This Limited Warranty is not assignable or transferable. It covers only the 

original purchaser. 

8. 

RESERVED RIGHT TO CHANGE:

 Manufacturer reserves the right to make changes or improvements to 

products it produces in the future without imposing on itself any obligations to install the same 
improvements in the products it has previously manufactured. 

9.  This Limited Warranty gives the Original Purchaser specific legal rights but there may be other rights 

which vary by jurisdiction. 

10.  This warranty does not cover the following items: 

 

Chips or scratches on porcelain or painted surfaces 

 

Rust or corrosion is not deemed a manufacturing or materials defect 

 

Discoloration or loss of paint due to handling during assembly, heat or cleaning products. Paint 
may require touch up. 

 

Stainless steel discoloration or corrosion 

 

IF CUSTOMER SERVICE BECOME NECESSARY:

 

 

1. 

The Original Purchaser is responsible for shipping and handling charges of the returned item(s) 
and replacement parts, if any. 

2. 

All parts to be replaced will need to be shipped before replacement items will be sent. 

3. 

Follow the Customer Service Represen

tative’s instructions exactly. If a return is necessary, it 

must be packed carefully and shipped prepaid. 

 

Should you encounter any problems, 

CONTACT US FIRST 

DO NOT return product to the store! 

 

CUSTOMER SERVICE 

 

RANKAM (CHINA) MANUFACTURING COMPANY LIMITED 

1618 W. Rosecrans Ave., 

Gardena, CA 90249, 

U.S.A. 

– 888 – 837 – 1380

 

 

[email protected]

 

 

Made in China 

Summary of Contents for SC2039002-BN-00

























Reviews: