Brownie’s YP25DF, Operator'S Manual, Page: 6 / 46

6
Product Data
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012345678901234567890121234
Category Specifications
Air Delivery Rate (a)(b):
YP25DF 3.0 scfm, 2.5 FAD
YP35DF 3.5 scfm, 3.0 FAD
* Operating Pressure (Std): 3200 PSI
** Pressure setting, final 3400 PSI pressure safety valve (STD)
Dimensions: 36”L x 17”W x 18”H (91 x 44 x 46 cm)
Weight: Approx 110 lbs (50kg)
Use: Compression of atmospheric air.
Intake Pressure: Atmospheric Pressure
Compressor RPM:
YP25DF 1800
YP35DF 2300
Drive Belt Type: 3VX355
Number of Stages 3
Number of Cylinders 3
Cylinder Bore 1st Stage 60 mm
Cylinder Bore 2nd Stage 28 mm
Cylinder Bore 3rd Stage 12 mm
Piston Stroke 24 mm
Intermediate Pressure 1st Stage
YP25DF 80 psi / 5.5 bar
YP35DF 95 psi / 6.5 bar
Intermediate Pressure 2nd Stage
YP25DF 800 psi / 55 bar
YP35DF 942 psi / 65 bar
Compressor Block Oil Cap. 12 fl. oz. / 360 cm³
Recommended Oil Types: CF-2000 Synthetic Compressor Lubricant
Max. ambient temperature +43º to +100º F
+5º to +38º C
Max. permissible inclination 10º
of compressor (b):
* Unit has a max pressure rating of 5000 psi (3800 psi recommended)
** May be set higher or lower based on Pressure Switch settings
*** Electric motors also available; 3 phase, 50 or 60 HZ; and Single Phase 50 HZ
(a) free air delivered at tank filling from 0 to 3000 psi
(b) Value only valid if oil in level unit position is at highest mark on dipstick.