background image

 

 

Browan Communications Inc. 

No.15-1, Zhonghua Rd., Hsinchu Industrial Park, 

Hukou, Hsinchu, Taiwan, R.O.C. 30352 

Tel: +886-3-6006899 

Fax: +886-3-5972970 

 

 

Copyright 2020 Browan Co., Ltd. 

32 

 

 

Federal Communication Commission Interference Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Par
t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference i

n a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not ins

talled and used in accordance with the instructions, may cause harmful interference to radio communications. H
owever, there is no guarantee that interference will not occur in a particular installation. If this equipment does c

ause harmful interference to radio or television reception, which can be determined by turning the equipment of
f and on, the user is encouraged to try to correct the interference by one of the following measures: 

Reorient or relocate the receiving antenna. 

Increase the separation between the equipment and receiver. 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 

Consult the dealer or an experienced radio/TV technician for help. 

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance co

uld void the user's authority to operate this equipment. 

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) T
his device may not cause harmful interference, and (2) this device must accept any interference received, includ

ing interference that may cause undesired operation. 

IMPORTANT NOTE: 
Radiation Exposure Statement: 

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This eq
uipment should be installed and operated with minimum distance 20cm between the radiator & your body. 

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 

Country Code selection feature to be disabled for products marketed to the US/CANADA 

 

Summary of Contents for MiniHub Pro


































Reviews: