BW1254 User Guide v1.0
Nov. 2013
Page 50 of 184
Figure 62 – Reboot information
Reboot
– click the button to restart the server and apply the changes.
If there is no other settings needed to be modified, click the
Reboot
button to apply all
changes. If there are any other settings need to be changed, continuously to finish and
apply all changes and then click
Reboot
button to restart and take effect for all settings.
DynamicBridge Mode
DynamicBridge is smart, high efficiency, high performance, easy deployment and easy configuration
for point to multi-point bridge link. It enables BW1254 to automatically seek and associate nearby root
AP and dynamically self-configure for wireless bridge connection. Whenever a bridge link is broken,
the network will auto re-configure route to minimize the lost of WLAN operation. It also minimized the
technician intervention and reduce cost of going on-site to re-establish transmission paths.
Figure 63 – Advanced Wireless Setting (Bridge Mode)
Radio
– specify the wireless interface
NodeType
– show the node type (root or normal)
NetID
– Net ID for the association between root and normal(client) bridge link. It must be the same
between root and normal(client) association.
Security
– specify which security policy is used
Edit
– edit the selected
Bridge
link
entry you want to configure
Clicking
Edit
to configure the bridge parameters.
