1 Safety
1.1
General safety instructions
Caution
There is a risk of significant material damage
when installing the accessories. Accessories
must therefore only be installed by trained
contractors and commissioned by a competent
person appointed by the system installer.
Accessories used must correspond to the
technical regulations and be approved by the
manufacturer in combination with these
accessories.
Caution
Only genuine spare parts may be used.
Danger
Risk of death due to modifications to the boiler!
Unauthorised conversions and modifications to
the boiler are not permitted, as these can put
people at risk and cause damage to the boiler.
Failure to comply with these instructions renders
the approval for the boiler void.
1.2
Recommendations
The safety sets SIS 1 SGB and SIS 2 SGB are used to
secure heating systems with boilers of the series
Eurocondense 125 kW - 170 kW (SIS 1 SGB)
Eurocondense 215 kW - 300 kW (SIS 2 SGB).
Important
The blow-off pressure is preset at the factory to 3
bar and secured against adjustment.
The safety set SIS 3 SGB is used to secure heating
systems with gas condensing boilers of the series
Eurocondense 400 kW - 610 kW against overpressure
with a boiler output over 300 kW corresponding to DIN
12828.
en
1 Safety
12
358407 - 02 - 20022020
