4. Select Yes to continue.
5. Confirm the selection.
6. Select DHW Max. power.
Important
The display shows DHW Max. power only if your installation is fit
for this option.
7. Confirm the selection.
8. Turn the rotary dial to select the number of kW.
9. Confirm the selection.
4.5.8
Register predictive maintenance
The installler can register the IDA to the central server. The server will
receive data from the IDA and the appliance. At some moment the server
will give a signal to the installer that he should execute a timely
maintenance activity. In this way good functioning of the appliance is
ensured and unnecessary costs for the user are prevented.
Instruction for the installer:
1. Enter the main menu.
2. Select Settings.
3. Confirm the selection.
4. Select Register predictive maintenance.
5. Read the registration code or scan the QR code.
6. Register the code in the app connected to the central server.
Once a month the IDA will send data about the functioning of the
appliance to the server. For instance the number of operating hours, water
pressure, temperature, etc. The IDA will send instantly a message to the
server when the appliance has an error. The server will send a signal to
the installer when maintenance is necessary.
The data and messages are only sent to the server if:
The appliance is fit for this option.
The user has agreed on the data exchange after reading the Privacy
Policy.
The user has connected the IDA to the app.
Fig.56
AD-3001006-01
....... .......
....... ....... ....... ....... ....... ....... ....... ....... ....... .......
..
.
|
..
.
}
<1
Fig.57
AD-3001257-01
....... .......
.. .. kW
<1
4 Customisation
34
7726708 - v.01 - 18012019
