Z-8550A, 8560A
4. USING CF CARDS
26
4-5. Writing additional sewing data to CF cards
1
Carry out steps 1 to 3 in “4-3. Preparation for reading/writing data”.
2
Select [w 2] in CF data read/write mode.
3
4
Select the program numbers to be written (ALL, 1 - 99).
* If [ALL] is displayed, all additional sewing data will be
read at once.
5
The buzzer will sound and the selected sewing data will be copied from the
internal memory onto the CF card. When [End] is displayed, the process is
complete.
Writing complete
6
Press the TEST key to exit read/write mode.
7
Set the power switch (1) to OFF and remove the CF card.
0200B
0198B
0199B
0211B
0194B
0195B
0196B
Summary of Contents for Z-8550A
