Brother XL-2121, Operation Manual

Page: 50 / 63

49
5
OPTIONAL ACCESSORIES
Using the Walking Foot
This foot is very useful for sewing materials such as
vinyl cloth, synthetic leather, and thin leather. etc.
These materials are difficult to feed when sewing.
The walking foot prevents these materials from
crumpling, slipping or sticking between the presser
foot and material.
Note
●
Only use the walking foot for straight
sewing (Center Needle Position) and zigzag
stitching. Do not use other patterns.
1
Switch the machine off.
2
Raise the needle and the presser foot.
3
Loosen the presser foot screw to remove the
presser-foot holder.
1 Use a screwdriver
2
Presser-foot holder
3 Presser-foot screw
4
Attach the forked section of the connecting
lever to the needle clamp, and fit the walking
foot to the presser bar.
1 Forked part of operation lever
2 Presser bar holder
3 Needle clamp
Stitch Name Pattern
Stitch
Length
[mm (inch.)]
Stitch
Width
[mm (inch.)]
Straight Stitch
(Center
Needle
Position)
2.5 (3/32)
–
Straight Stitch
(Center
Needle
Position)
4.0 (3/16)
Zigzag Stitch 1.5 (1/16) 3.0 (1/8)
Zigzag Stitch 2.0 (1/16) 5.0 (3/16)
Zigzag (Satin)
Stitch
0.5 (1/32) 5.0 (3/16)
1
3
2
1
2
3