Brother ScanNCut DX Embossing Starter Kit Operation Manual Download Page 3 | Manualshive

Page: 3 / 10

Brother ScanNCut DX Embossing Starter Kit Operation Manual Download Page 3

3

CanvasWorkspace has a large variety of embossing patterns that can be used immediately.

Activating Embossing patterns on
CanvasWorkspace

a

From a computer, log in to CanvasWorkspace.
(http://CanvasWorkspace.Brother.com)

• New users should create a free account.

b

Click

at the top of the Web page.

c

Click <Premium Function Activation>.

d

Type in the activation code on the included activation
code card, and then click <Activate>.

• The uppercase letters “I” and “O” are not used in the activation

code.

• The activation code is valid for only one login ID for

CanvasWorkspace.
The same activation code cannot be used again.

e

Check the content on the activation confirmation screen,
and if there are no problems, click <Activate>.



Click <OK>, and the activation is complete.

A pattern category for embossing is added to CanvasWorkspace.
For details on using CanvasWorkspace, refer to the "Help" by

clicking

in the upper right of the screen.

Activating the Embossing function on the
machine

a

Touch "Premium Functions" on the settings screen.

b

Select "ON" beside "Kit Activation (Emboss)".

• As a default, this function is set to “OFF”.

Activating the Embossing function

«
1
2
3
4
5
...
»

Summary of Contents for ScanNCut DX Embossing Starter Kit











Reviews:

No comments