Brother S-7300A Instruction Manual Download Page 100 | Manualshive

Page: 100 / 108

background image

13. LIST OF ERROR CODES

P.C. board-related errors

Code

Cause

Remedy

E700

Abnormal rise in power supply voltage was
detected when power was turned on.

Turn off the power and check the power supply
voltage.

E701

Abnormal rise in sewing machine motor power
supply voltage was detected.

・

Turn off the power and check the power supply
voltage.

・

Turn off the power and check the connection of
connector P13.

E705

Abnormal drop in power supply voltage was
detected.

Turn off the power and check the power supply
voltage.

E709

Power supply signal could not be detected when
power was turned on.

Turn the power off and then back on again.

E710

Abnormal sewing machine motor current was
detected.

Turn off the power and check the connection of
connector P5.

E711

Abnormal electrical current for feed motor is
detected.

Turn off the power and check the connection of
connector P4.

E791

Abnormal solenoid mechanism current detected
when solenoid was activated.

Turn off the power and check the connection of
connector P1.

Version updating errors

Code

Cause

Remedy

E880

Version update request could not be received when
power was turned on.

Turn off the power and check the connection of
connector P2.

E881

Communication error was detected during main
version update.

Turn off the power and check the connection of
connector P2.

E882

No USB medial connected when power was turned
on.

Turn off the power and check the connection of the
USB media.

E883

Version update file could not be detected in USB
media when power was turned on.

Turn off the power and then check that the version
update file is contained in the USB media.

E884

Problem with version update file detected during
version updating.

Turn off the power, and then repeat the version
update procedure.

E885

Version update file could not be read from USB
media during version updating.

Turn off the power and check the connection of the
USB media.

E886

Problem with version update file detected during
version updating.

Turn off the power, and then repeat the version
update procedure.

E887

Version update file could not be written during
version updating.

Turn off the power, and then repeat the version
update procedure.

E888

Error sending or receiving version update file.

Turn off the power, and then repeat the version
update procedure.

E889

Incorrect data written to flash memory.

Turn off the power, and then repeat the version
update procedure.

E890

Error occurred during version update.

Turn off the power, and then repeat the version
update procedure.

If an error code that is not listed above appears or if carrying out the specified remedy does not solve the problem,
contact the place of purchase.

S-7300A

89

«
...
98
99
100
101
102
...
»

Summary of Contents for S-7300A













































































































Reviews:

No comments

Related manuals for S-7300A

Brand: Neopost Pages: 6

NordicTrack FREESTRIDE TRAINER FS9i

Brand: ICON Health & Fitness Pages: 36

Brand: FLIR Pages: 50

Brand: Datalogic Pages: 120

Brand: Bulldog Security Pages: 7

Citymaster 2000

Brand: HAKO Pages: 186

Brand: Altrad Belle Pages: 46

Brand: Nakajima Pages: 22

Brand: Pfaff Pages: 130

Brand: Duerkopp Adler Pages: 154

Smoke 700 Magic

Brand: Audibax Pages: 2

Brand: JUKI Pages: 88

LK-1900S Series

Brand: JUKI Pages: 92

LBH-1790A Series

Brand: JUKI Pages: 79

Brand: JUKI Pages: 24

Auto-Logic KX-F115

Brand: Panasonic Pages: 34

Facsimile UF-590

Brand: Panasonic Pages: 162

DX 1000 - PanaFax B/W Laser Printer

Brand: Panasonic Pages: 200

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands