S-7000DD
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
24
4-5. Adjusting the needle up stop position
1
(While pressing the key
(1)
, turn on the power switch.)
“MorG” will appear in the display (2).
2
Selecting “UPoS”
3
Needle up stop position setting
・
If the D
key is pressed, the setting value
will increase and the needle up stop position
will become lower.
・
If the C key is pressed, the setting value
will decrease and the needle up stop position
will become higher.
・
The setting range is from –5 to 10.
NOTE:
A setting value of “10” corresponds to an
angle of rotation of approximately 10
for the
upper shaft.
4
The setting will be stored and the display will
return to the setting item.
5
Normal sewing machine operation will then be
possible.
0526D
(Setting item)
Becomes higher
Becomes lower
(Setting value)
(Setting item)
Example
0528D 0529D
0527D
0530D
0520D
(Press once)
* For details on other adjustment items, refer to the Service Manual.
