S-6200A
6. USING THE G1A OPERATION PANEL (ADVANCED OPERATIONS)
29
6-6. Adjusting the needle up stop position
1
(While pressing the key (1), press the power ON switch.)
“MorG” will appear in the display (2).
2
Selecting “UPoS”
(Press once)
3
Needle up stop position setting
If you press the key, the setting value will
increase and the needle up stop position will
become lower.
If you press the key, the setting value will
decrease and the needle up stop position will
become higher.
The setting range is from –5 to 10.
* A setting value of “10” corresponds to an angle of
rotation of approximately 10
°
for the upper shaft.
4
The setting will be stored and the display will return
to the setting item.
5
Normal sewing machine operation will then be
possible.
4206M
* For details on other adjustment items, refer to the Service Manual.
1974B 2138M 2139M
Becomes higher
Becomes lower
4217M
2138M
(Setting value)
(Setting item)
(Setting item)
Example:
2130B
4220M