S-6200A
6. USING THE G1A OPERATION PANEL (ADVANCED OPERATIONS)
25
6-2. Slow start
When the slow start setting is enabled, the two stitches at the sewing start after thread trimming will be sewn at 700 sti/min.
After this, the sewing speed corresponds to the treadle depression amount.
1
Activating setting mode
(While pressing the end backtack key, press the power ON switch.)
2
Selecting “SLoW” (slow start)
(Press twice)
3
Enabling and disabling slow start
When the key is pressed, the “on”
display will appear.
When the key is pressed, the “oFF”
display will appear.
…
Slow start enabled
…
Slow start disabled
NOTE:
If the start backtack key (1) is pressed once
more, the start backtack indicator will switch
off and the display will return to the setting
item.
4
The setting will be stored and the display will
return to the setting item.
5
Setting mode will be exited and normal operation will be possible.
4206M
(Setting value)
(Setting item)
(Setting item)
(Setting item)
4203M
4207M
4208M 2138M 2139M
4209M