manualshive.com logo in svg

Brother RuggedJet RJ-2030, User Manual

Share
Download
Brother RuggedJet RJ-2030 User Manual Download Page 62

Changing the Printer Settings 

53

3

4 Disable these settings

When this check box is selected, 

 appears in the tab, and the settings can no longer be specified or 

changed.

Settings in a tab where 

 appears will not be applied to the printer even if [

Apply

] is clicked. In addition, 

the settings in the tab will not be saved or exported when the [

Save in Command File

] or [

Export

] 

command is executed.

5 Current Settings

Retrieves the settings from the currently connected printer and displays them in the dialog box. Settings 

will also be retrieved for parameters on tabs with 

.

6 Parameters

Displays the current settings.

7 Exit

Exits [

Device settings

], and returns to the main window of the Printer Setting Tool.

8 Apply

Applies the settings to the printer.
To save the specified settings in a command file, select [

Save in Command File

] from the drop-down list.

The saved command file can be used with the mass storage mode to apply the settings to a printer. (See 

Mass Storage Mode

 on page 72.)

Summary of Contents for RuggedJet RJ-2030


























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands