Brother PT-P910BT, User Manual

Page: 68 / 88

Home > Routine Maintenance > Maintenance
Maintenance
We recommend cleaning your Label Printer on a regular basis to maintain the best performance.
Always disconnect the USB cable and turn the Label Printer off before cleaning.
>> Clean the Label Printer (Exterior)
>> Clean the Print Head and Head Roller
>> Clean the Tape Cutter
Clean the Label Printer (Exterior)
• Wipe any dust and marks from the label printer's exterior using a soft, dry cloth. Use a cloth slightly damp
with water on difficult to remove marks.
IMPORTANT
Do not use paint thinner, benzene, alcohol, or any other organic solvent. These may deform or damage
the Label Printer case.
Clean the Print Head and Head Roller
Streaks or poor-quality characters on printed labels generally indicate that the print head and head roller are
dirty.
•
Clean the print head using a dry cotton swab, or the optional Print Head Cleaning Cassette (TZe-CL6).
CAUTION
Do not touch the print head directly with your bare hands. The print head may be hot.
Print Head
65