background image

 

Care and precautions

 

1) Use a soft, dry cloth to clean the machine.
2) Use only 

 

AA-size (LR6) alkaline batteries

 

.

3) Do not expose the machine or the tape cassette to high 

temperatures, high humidity, or excessive dust.

4) If you do not intend to use the machine for an extended 

period of time, remove the batteries.

5) Do not touch the tape cutter button while printing or 

replacing the cutter unit.

6) Do not touch the cutter blade.
7) Do not block the tape exit slot. 

8) Do not put labels in your mouth.
9) Do not stick labels onto skin.
10) If the machine “locks up” (i.e., it does not respond 

when a key is pressed), press 

 to turn off the 

machine; then, while holding down 

 and 

press 

 once to turn the machine on again.

 

FCC NOTICE

 

This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protec-
tion against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one
or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and
receiver.

Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician
for help.

Changes or modifications not expressly approved by Brother
Industries, Ltd. could void the user’s authority to operate the
equipment.

 

How to make a label

 

1) Insert the batteries.
2) Insert a tape cassette.
3) Turn on the P-Touch by pressing 

.

4) Type in and format the text.

 

Your text can be up to 55 characters long including spaces. See 
“Advanced functions” for more details on formatting your text.

 

5) Print the label by pressing 

.

 

Before printing, be sure that the back cover is attached, 
otherwise the label cannot be printed.

 

6) Cut off the label.

 

The tape cutter button is equipped with a safety mecha-
nism. Do not try to force the cutter button since it cannot 
be operated if no cassette is installed and the back cover is 
removed. If the cutter button is forcefully operated, correct 
printing may no longer be possible.

 

7) Peel off the backing.

 

Changing the batteries

 

1) Remove the back cover by pressing in on the rough 

area at the top end of the machine and pulling off the 
back cover.

2) If batteries are already installed, remove them.

 

Before removing the batteries, pull out the tape cas-
sette if one is installed.

 

3) Insert 

 

six new AA-size (LR6) alkaline batteries

 

 in the 

direction shown by the illustration on the bottom of the 
battery compartment. The positive end of the three bat-
teries in the bottom row point downward, while the 
positive end of the top three batteries point in the 
opposite direction.

Back cover

 

When inserting new batteries, always insert them pos-
itive end first. When removing old batteries, always 
remove them negative end first.

Always replace all six batteries at the same time with 
brand new ones.

 

4) Attach the back cover by inserting the two hooks on the 

bottom end of the back cover into the slots on the bot-
tom end of the machine, then pushing down firmly on 
the cover until it snaps into place.

 

Changing the tape cassette

 

1) Remove the back cover by pressing in on the rough 

area at the top end of the machine and pulling off the 
back cover.

2) If a tape cassette is already installed, pull it straight out 

and remove the paper tab from the new tape cassette. 
Make sure that the end of the tape in the new cassette 
feeds under the tape guides.

 

The tape that is provided with the P-touch 
Home&Hobby is a 13.3’ long (4m) starter tape. Tapes 
available for purchase are 26.2’ (8m) long.

 

3) Insert the tape cassette, making sure that it clicks into place.

 

Check that the cassette fits properly around the two 
metal guides in the cassette compartment.

 

4) Attach the back cover by inserting the two hooks on the 

bottom end of the back cover into the slots on the bot-
tom end of the machine, then pushing down firmly on 
the cover until it snaps into place.

 

5) Feed the tape by holding down 

 and pressing 

then cut the tape by pressing in on the tape cutter button.

 

The amount of tape remaining is visible through the 
window in the back of the P-Touch.
When the usable tape is finished, green ribbon appears.

 

Changing the cutter unit

 

When the cutter becomes blunt and ceases to cut the tape 
cleanly, replace it.
1) Remove the back cover and the tape cassette. 
2) Grasp the tab on the top of the cutter unit and pull out 

the cutter, taking care not to touch the blade.

3) Grasp the tab on the new cutter unit and insert it as 

shown below.

 

Cleaning the print head

 

If dust accumulates on the print head, blank horizontal 
lines may appear through the printed label. If this hap-
pens, clean the print head as follows:
1) Turn off the P-Touch.
2) Remove the back cover and the tape cassette.
3) Use a dry cotton swab to gently wipe the print head 

and rubber pinch roller with an up-and-down motion.

4) Re-insert the tape cassette, attach the back cover, turn 

on the machine, hold down 

 and press 

 to feed 

the tape, and then try printing.

5) If blank lines remain in the printed label, repeat steps 1 

through 4, this time using a cotton swab dipped in iso-
propyl (rubbing) alcohol.

 

Accessories

 

Most retailers and distributors carry a full line of tape cas-
settes. If you wish to order accessories for your P-Touch 
direct from Brother, please refer to the “Accessory Order 
Form” included separately, or visit our web site 
“http://www.brothermall.com”.

Tape guides

Metal guides

Tape cutter 
button

 

CAUTION

When changing the cutter unit, be sure not to 
touch the cutter blade.

Keep the cutter unit in a safe place that is out of 
the reach of small children.

 

The following accessories are available:

 

Tape cassettes

1/2” (12 mm)
$9.99 (SRP)

3/8” (9 mm)
$8.99 (SRP)

Black on silver
Black on gold
Black on blue
Black on green
Black on pink

M-931
M-831
M-531
M-731
M-E31

M-921
M-821
M-521
M-721
M-E21

Black on white

M-231

Replacement cutter 
unit

TC7 $9.95 (SRP)

Carrying case

6991 $17.99

Cutter unit

Tape exit slot

Tab

Thermal print head

Rubber pinch 
roller

 

With the P-Touch HOME&HOBBY, you can make labels quickly and easily. Simply switch on the P-Touch, type in your text, then
print out your label. You can choose from five different text sizes, nine character styles, and seven framing settings. The text can be
printed on either one or two lines and can include accented characters and special symbols. In addition, nine preset layout formats are
available for you to type in and print out labels quickly. Six tape color (white, silver, gold, blue, green and pink) and two tape widths
(3/8” (9 mm) and 1/2” (12 mm)) are available for creating personalized labels.

 

LA3085001
Printed in China

 

®

 

Please read this instruction leaflet before using the P-Touch. Keep 
it in a handy place for future reference.
Use only tape cassettes bearing the 

logo with this machine.

TAPE

Reviews: