64
FLAT FELL SEAM
1. Attach presser foot “J”. Sew the seam line, then cut half of the
seam allowance from the side that the flat fell seam will lie
against.
1
About 1.2 cm (1/2")
2
Reverse side
*
Before sewing, touch the automatic reinforcement stitching
key to sew reinforcement stitches automatically at the begin-
ning and at the end of the stitch.
2. Spread out the fabric along the finish line.
1
Finish line
2
Reverse side
3. Lay both seam allowances to the shorter one’s (cut one) side
and iron them.
1
Reverse side
4. Fold the longer seam allowance around the shorter one, and
sew the edge of the fold.
1
Reverse side
For reinforcing seams and neatly finishing edges
J
00
