Brother P-Touch PT-E550WVP User Manual Download Page 12

Page: 12 / 65

Label Preview



LABEL PRINTING

You can preview the current page and check the layout before printing.

Press the

Preview

key.

An image of the label is displayed on the screen.
1. The bar indicates the position of the currently

displayed portion of the label.

2. The tape width of the installed tape cassette and the

label length are indicated as follows:

Tape width x Label length

3. The information for the installed tape cassette is

detected and indicated. The first line indicates the

character color and the second line indicates the tape

color.

Press the or key to scroll the preview to the left or right.

Press the or key to change the magnification of the preview.

Labels can be printed once text entry and formatting is complete.

Label Preview

• Press the

Esc

Enter

key to return to the text entry screen.

• To scroll the preview to the left or right end, press the

Shift

key and then press the or key.

• To print the label directly from the preview screen, press the

Print

key or open the print options

screen and select a print option. Refer to "Printing a Label" on page 11 for details.

• The print preview is a generated image of the label, and may differ from the actual label when

printed.

• The character color and tape color cannot be detected for some tape cassettes.

Printing a Label

• Do not pull the label coming out of the tape exit slot. Doing so will cause the ink ribbon to

be discharged with the tape, making the tape no longer usable.

• Do not block the tape exit slot during printing or when feeding tape. Doing

so will cause the tape to jam.

• Be sure to check that there is enough tape remaining when printing several

labels continuously. If tape is running low, set fewer copies, print labels one

at a time, or replace the tape cassette.

• Striped tape indicates the end of the tape cassette. If this appears during

printing, press and hold the

Power

key to turn the P-touch labeling system

off. Attempting to print with an empty tape cassette may damage the P-

touch labeling system.

www.calcert.com

[email protected]

1.888.610.7664

Summary of Contents for P-Touch PT-E550WVP


































































Search results

Summary of Contents for P-Touch PT-E550WVP

Reviews:

Related manuals for P-Touch PT-E550WVP

Brands by name

Popular brands

Brother P-Touch PT-E550WVP, User Manual

Search results

Summary of Contents for P-Touch PT-E550WVP

Reviews:

Related manuals for P-Touch PT-E550WVP

Brands by name

Popular brands