background image

GETTING STARTED

10

Power Supply and Tape cassette

• Remove the batteries if you do not intend to use the P-touch for an 

extended period of time.

• Dispose of the battery at an appropriate collection point, not in the 

general waste stream. In addition, be sure to observe all applicable 

federal, state, and local regulations.

• When storing or discarding the battery, cover both ends of the battery 

with cellophane tape, to prevent it from short-circuiting.

(Battery insulation example)

1. Cellophane tape

2. Alkaline or Ni-MH battery

Insert a Tape Cassette

NOTE

• When inserting the tape cassette, make sure that the tape and ink 

ribbon do not catch on the print head.

• If you cannot close the tape cassette compartment cover, check to 

ensure the release lever is in the up position. If not, lift the lever, and 

then close the cover.

1

2

CAUTION

USING A COMBINATION OF DIFFERENT BATTERIES (SUCH AS Ni-MH AND 

ALKALINE), MAY RESULT IN AN EXPLOSION. DISPOSE OF USED 

BATTERIES ACCORDING TO THE INSTRUCTIONS.

Tape cassette 

compartment

Release lever

Tape cutter

Tape exit slot

Tape cassette compartment cover

Tape cutter lever

Print head

Keyboard

LCD display

Summary of Contents for P-touch D450

























































Reviews: