Brother Operating Instructions, Basic User'S Manual

Page: 86 / 155

74
Out of Memory
The machine’s memory is full. Reduce the print resolution.
(See Software User’s Guide.)
Out of Memory
Secure Print Data
is full. Press
Stop Key and
delete the
previously stored
data.
The machine’s memory is full.
Press and delete the previously stored
secure print data.
Print Unable XX
The machine has a mechanical
problem. Do one of the following:
 Press and hold down to turn the
machine off, wait a few minutes, and then
turn it on again.
 If the problem continues, call Brother
Customer Service.
Registration failed.
Registration failed. Press
OK
and try again.
 Press and hold down to turn off the
machine.
Wait a few seconds, then turn it on again.
Perform the auto color registration using
the Touchscreen (
see Advanced User’s
Guide
: Auto Registration ).
 Put in a new belt unit (see Replacing the
belt unit on page 60).
 If the problem continues, call Brother
Customer Service.
Replace Belt
It is time to replace the belt
unit. Replace the belt unit (see Replacing the belt
unit on page 60).
Replace DrumX
1
1
(
X
) shows drum unit
color that must be
replaced. BK=Black,
C=Cyan,
M=Magenta,
Y=Yellow.
It is time to replace the drum
unit. Replace the drum unit for the color indicated on
the Touchscreen (see
Replacing the drum
units on page 55).
The drum unit counter was not
reset when a new drum was
installed. Reset the drum unit counter. (see Resetting the
drum counter on page 60).
Error Message Cause Action