Control panel setup
45
3
Restoring the network settings to factory default
3
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all network settings to the factory default.
a
Press
Menu
.
b
Press
a
or
b
to choose
Network
.
Press
OK
.
c
Press
a
or
b
to choose
Network Reset
.
Press
OK
.
d
Press
1
to choose
Reset
.
e
Press
1
to choose
Yes
for reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
Printing the Network Configuration List
3
Note
Node name: Node name appears on the Network Configuration List. The default node name is
“BRNxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your machine’s MAC Address / Ethernet Address.)
The Network Configuration List prints a report listing all the current network configuration including the
network print server settings.
a
Press
Menu
.
b
(For MFC model) Press
a
or
b
to choose
Print Reports
.
(For DCP model) Press
a
or
b
to choose
Machine Info.
.
Press
OK
.
c
Press
a
or
b
to choose
Network Config
.
Press
OK
.
d
Press
Start
.
Note
If the
IP Address
on the Network Configuration List shows
0.0.0.0
, wait for one minute and try again.
