7 - 1
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
7
ZleFB_MFC9800-FM5.5
7
Auto Dial Numbers
and Dialing Options
Storing Numbers for Easy Dialing
You can set up your MFC to do three types of easy dialing: One Touch, Speed
Dial, and Groups for Broadcasting of faxes. You can store names with these
numbers for easy identification.
Storing One Touch Dial Numbers
You can store 32 fax/phone numbers that you can dial by
pressing one key (and
Fax Start
). To access numbers 17
to 32, hold down the
Shift
key. When you press a One
Touch dial location, the LCD shows the name or number
as the call is dialed. (See
One Touch keys are the 16 keys (numbers 01–32) located on the left side of the control
panel.
1
Press
Menu
,
2
,
3
,
1
.
2
Press the One Touch key where you want
to store a number.
3
Enter a number (up to 20 digits), and then press
Set
.
Changing One Touch and Speed Dial Numbers
4
Use the dial pad to enter the name (up to
15 characters), and then press
Set
—
OR
—Press
Set
to store the number
without a name. (See
5
Return to Step 2 to store another number—
OR
—Press
Stop/Exit
.
When you dial an auto dial number, the LCD shows the name you’ve stored, or,
if you haven’t stored a name, the nember you’ve stored.
If you must wait for another dial tone at any point in the dialing sequence, store
a pause at that point in the number by pressing
Redial/Pause
. Each key press
adds a 3.5 second delay.
If you lose electrical power, auto dial numbers stored in memory will
not
be
lost.
(For USA only) One-Touch key
1
has been pre-programmed for the Brother
fax-back system.
If you want to enter a pause in the dialing sequence (for example, to access an
outside line), press
Redial/Pause
as you’re entering digits.
Each key press of
Redial/Pause
enters a 3.5 second pause when the number
is dialed, and a dash appears on the screen.
1 . O N E - T O U C H D I A L
N A M E :
E N T E R & S E T K E Y
