manualshive.com logo in svg

Brother MFC9800 - MFC 9800 B/W Laser, Owner'S Manual

Share
Download
Brother MFC9800 - MFC 9800 B/W Laser Owner'S Manual Download Page 187

T R O U B L E S H O O T I N G   A N D   R O U T I N E   M A I N T E N A N C E      

21 - 2

ZleFB_MFC9800-FM5.5

COOLING 
DOWN
WAIT FOR A 
WHILE

The temperature of the drum unit or 
toner cartridge is too hot. The MFC 
will pause its current print job and go 
into cooling down mode. During the 
cooling down mode, you will hear the 
cooling fan running while the display 
on the MFC shows 

COOLING 

DOWN

, and 

WAIT FOR A WHILE

.

You must wait 20 minutes for it to 
cool.

COVER OPEN
PLS CLOSE 
COVER

The front cover was not completely 
closed. 

Close the front cover for the drum 
unit.

DISCONNECTED

The other party or other party’s fax 
machine terminated the call.

Try to transmit or receive again.

CHECK 
ORIGINAL

Originals were not inserted or fed 
properly, or original scanned from 
ADF was longer than about 40 inches 
(90cm).

See 

Original Jams and Paper Jams, 

page 21-3.

MACHINE 
ERROR XX

MFC has a mechanical problem.

Call Brother Customer Service.

In USA:

1-800-284-4329

In Canada:

1-800-853-6660

In Montreal:

1-514-685-6464

OUT OF 
MEMORY

 

(May occur when 
the MFC is used as 
a printer)

You can’t store data in the memory.

See page 11-2.

NO RESPONSE/
BUSY

The number you dialed does not 
answer or is busy.

Verify the number and try again.

NOT 
REGISTERED

You tried to access a One Touch or 
Speed Dial number that is not 
programmed.

Set up the One Touch or Speed Dial 
number. (See pages 7-1, 7-2.)

PLS OPEN 
COVER

A page, piece of paper or paper clip, 
etc. may be jammed inside the MFC.

Open the front cover. If you see any 
jammed paper or other item, gently 
pull it out, then close the front cover. If 
the error message remains, open and 
close the front cover again. If the MFC 
cannot reset itself and return to the date 
and time prompt, it will display 

MACHINE ERROR XX

. Please call 

Brother Customer Service and tell 
them the MFC Error number at:

In USA:

1-800-284-4329

In Canada:

1-800-853-6660

In Montreal:

1-514-685-6464

PAPER JAM

The paper is jammed in the MFC.

See page 21-4.

Error Messages

Error Message

Cause

Action

Summary of Contents for MFC9800 - MFC 9800 B/W Laser









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands