manualshive.com logo in svg

Brother MFC MFC-5440CN, User Manual

Share
Download
Brother MFC MFC-5440CN User Manual Download Page 134

TROUBLESHOOTING AND ROUTINE MAINTENANCE   

11 - 2

Document Jam

 

The document scanned from ADF 
was longer than about 90 cm.

See 

Using the automatic document feeder 

(ADF)

 on page 1-7.

The document is jammed in the 
MFC.

See 

Document jams

 on page 11-5.

High 
Temperature

The print head is too warm.

Allow the MFC to cool down.

Ink Empty

One or more of the ink cartridges 
is empty. The MFC will stop all 
print operations. While memory is 
available, black and white faxes 
will be received into memory. If a 
sending machine has a colour fax, 
the MFC’s ‘handshake’ will 
request that the fax be sent as 
black and white. If the sending 
machine has the ability to convert 
it, the colour fax will be received 
into memory as a black and white 
fax.

Replace the ink cartridges. 
(See 

Replacing the ink cartridges

 on page 

11-25.)

Low 
Temperature

The print head is too cold.

Allow the MFC to warm up.

Media Error

(MFC-5840CN 
only)

The media card is either 
corrupted, improperly formatted, 
or there is a problem with the 
media drive.

Re-insert the card firmly into the slot to make 
sure it is in the proper position. If the error 
remains, check the media drive by inserting 
another media card that you know is working.

Near Empty

One or more of the ink cartridges 
are running out of ink. If a sending 
machine has a colour fax, the 
MFC’s ‘handshake’ will request 
that the fax be sent as black and 
white. If the sending machine has 
the ability to convert it, the colour 
fax will be received into memory 
as a black and white fax.

Order a new ink cartridge.

No Cartridge

An ink cartridge is not properly 
installed.

Take out the ink cartridge and put it in again 
seating it properly.
(See 

Replacing the ink cartridges

 on page 

11-25.)

No File

(MFC-5840CN 
only)

The media card in the media drive 
does not contain a .JPG file.

Re-insert the correct media card.

ERROR MESSAGES

ERROR 
MESSAGE

CAUSE

ACTION

Summary of Contents for MFC MFC-5440CN



























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands