manualshive.com logo in svg

Brother MFC-J2330DW, User Manual, Page: 272 / 814

Share
Download
Brother MFC-J2330DW User Manual Download Page 272

 Home > 

Copy

 > Copy an ID Card

Copy an ID Card

Use the 

[2in1(ID)]

 feature to copy both sides of an identification card onto one page, keeping the original

card size.

•

Make sure the paper size is set to A4 or Letter.

•

You may copy an identification card to the extent permitted under applicable laws. For more information, see
the 

Product Safety Guide

.

>> MFC-J2330DW/MFC-J5330DW/MFC-J5335DW
>> MFC-J2730DW/MFC-J5730DW/MFC-J5930DW

MFC-J2330DW/MFC-J5330DW/MFC-J5335DW

1. Place your identification card face down near the upper-left corner of the scanner glass.

a

b

c

d

a

a. 3 mm or greater (top, left)
b. 207 mm
c. 145 mm
d. scannable area

2. Press 

 

[Copy]

.

3. Enter the number of copies in one of the following ways:

•

Press 

[-]

 or 

[+]

 on the Touchscreen.

•

Press 

 to display the keyboard on the Touchscreen, and then enter the number of copies using the

Touchscreen keyboard. Press 

[OK]

.

•

Enter the number of copies using the dial pad.

4. Press 

[Options]

 > 

[Page Layout]

 > 

[2in1(ID)]

.

5. Read and confirm the displayed list of settings you have selected. When you have finished changing settings,

press 

[OK]

.

6. Press 

[Mono Start]

 or 

[Colour Start]

.

The machine starts scanning one side of the identification card.

265

Summary of Contents for MFC-J2330DW















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments