manualshive.com logo in svg

Brother MFC-J2330DW, User Manual, Page: 273 / 814

Share
Download
Brother MFC-J2330DW User Manual Download Page 273

7. After the machine has scanned the first side, turn over the identification card and press 

[Continue]

 to scan

the other side.

MFC-J2730DW/MFC-J5730DW/MFC-J5930DW

1. Place your identification card face down near the upper-left corner of the scanner glass.

a

b

c

d

a

a. 3 mm or greater (top, left)
b. 207 mm
c. 145 mm
d. scannable area

2. Press 

 

[Copy]

.

3. Enter the number of copies in one of the following ways:

•

Press 

[-]

 or 

[+]

 on the Touchscreen.

•

Press 

 to display the keyboard on the Touchscreen, and then enter the number of copies using the

Touchscreen keyboard. Press 

[OK]

.

•

Enter the number of copies using the dial pad.

4. Press 

[Options]

 > 

[Page Layout]

 > 

[2in1(ID)]

.

5. Read and confirm the displayed list of settings you have selected. When you have finished changing settings,

press 

[OK]

.

6. Press 

[Mono Start]

 or 

[Colour Start]

.

The machine starts scanning one side of the identification card.

7. After the machine has scanned the first side, turn over the identification card and press 

[Continue]

 to scan

the other side.

  Related Information

•

Copy

 

266

Summary of Contents for MFC-J2330DW















































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments