Brother MFC-8220, Service Manual

Page: 41 / 328

MFC-8220
SERVICE MANUAL
2-17
Brother Native driver Installation
(21) Click Start and select Printers and Faxes .
Click on Add a printer and the Add Printer Wizard will start.
When this screen appears, click Next .
(22) Un-check the Automatically detect and install my Plug and Play printer selection
and then click Next .
(23) Select USBXXX from the pull down window for the Printer Port Selection and then click
Next .
(24) Click on Have Disk .
(25) Browse the CD-ROM and highlight your language folder and click Open .
Highlight the WXP folder and click Open .
Highlight the Addprt folder and click Open .
(26) Click Open .
(27) Make sure X: \ENG\W2K\Addprt is displayed in the window and click OK (X:\ is the
drive letter of your CD-ROM).
(28) Highlight the model you are installing from the list of machines and click Next .
NOTE:
Make sure you select a USB printer.
(29) The model you are installing will be listed in the window. Select Yes or No if you want
this driver to be your default printer and then click Next .
(30) If this screen appears, select Do not share this printer and Next .
(31) Select Yes and Next to print a test page.
(32) When this screen appears, click Finish .
(33) When this screen appears, click Continue Anyway .
NOTE:
•
There will be two Brother printer drivers listed in the “Printers” selection.
•
The driver with Printer after the model name (ex. Brother MFC-8220 Printer) is the
Brother Native Driver.
OK:
The Brother Native Drivers have been installed and the installation is now complete.