38
Windows
®
Wireless Network
j
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
k
When the
On-Line Registration
screen is
displayed, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, close your
web browser to return to this window.
Then click
Next
.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
Next
.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows
APIPA
in the
IP
Address
field, click
Configure IP Address
and enter an IP address for your machine that
is suitable for your network.
• If the machine is not yet configured for use on
your network, the following screen appears.
Click
OK
.
The
Configure IP Address
window will
appear. Enter an IP address for your machine
that is suitable for your network by following the
on-screen instructions.
Note
If your wireless settings fail, an error message will
appear during the installation of MFL-Pro Suite
and the installation will be terminated. If you
encounter this failure, please go to step
on
page 31 and setup the wireless connection again.
Important
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
For Windows Vista
®
, when this screen appears,
click the check box and click
Install
to complete
the installation correctly.
