4 - 5
SETUP RECEIVE
Setting the F/T Ring Time (Fax/Tel mode only)
If you set the Receive Mode to
Fax/Tel
, you’ll need to decide how
long the machine will signal you with its special pseudo/double-ring
when you have a
voice
call. (If it’s a fax call, the machine prints the
fax.)
This pseudo/double-ring happens after the initial ringing from the
phone company. Only the machine rings and no other phones on the
same line will ring with the special pseudo/double-ring. However, you
can still answer the call on any telephone on the same line as the
machine. (See
1
If it is not illuminated in green, press
(
Fax
).
2
Press
Menu/Set
,
2
,
1
,
2
.
3
Press
▲
or
▼
to select how long the machine will ring to alert you
that you have a voice call [20, 30, 40 or 70 seconds (20, 30, 40,
55 seconds for New Zealand)].
Press
Menu/Set
.
4
Press
Stop/Exit
.
Setting the Fax/Tel Announcement
For the Fax/Tel receive mode, you can set up the machine to play an
outgoing announcement for callers when no one is there to answer
calls. (See
Record Fax/Tel Outgoing Announcement (F/T OGM)
Even if the caller hangs up during the pseudo/double-ringing,
the machine will continue to ring for the set time.
