Brother MFC 3420C - Color Inkjet - All-in-One User Manual Download Page 72

Page: 72 / 201

SETUP SEND

6 - 3

Faxing from the automatic document feeder (ADF)

Faxing from the ADF

If it is not illuminated in green, press

(

Fax

Load your document. (See

Load documents

on page 2-1.)

Dial the fax number.

Press

Mono Start

Colour Start

. The machine starts

scanning the first page.

Faxing from the scanner glass

You can use the scanner glass to fax pages of a book or one page
at a time. The documents can be up to A4 size. To cancel, press

Stop/Exit

If it is not illuminated in green, press

(

Fax

Load your document on the scanner glass. (See

Using the

scanner glass

on page 2-3.)

Dial the fax number.

Press

Mono Start

Colour Start

The machine starts scanning the first page.

If you press

Colour Start

, the machine starts sending.

To send a single page, press

(or

press

Mono Start

again).

The machine starts sending the
document.

—

To send more than one page, press

and go to Step 5.

Place the next page on the scanner
glass.

Press

Menu/Set

The machine starts scanning. (Repeat Steps 4 and 5 for each
additional page.)

■

If the memory is full and you are faxing a single page, it will
be sent in real time.

■

If you need to cancel before the fax is sent, press

Stop/Exit

You cannot send multiple pages for colour faxes.

Next Page?

1.Yes 2.No(Dial)

Set Next Page

Then Press Set

Summary of Contents for MFC 3420C - Color Inkjet - All-in-One










































































































































































































Search results

Summary of Contents for MFC 3420C - Color Inkjet - All-in-One

Reviews:

Brother MFC 3420C - Color Inkjet - All-in-One, User Manual, Page: 72 / 201

Search results

Summary of Contents for MFC 3420C - Color Inkjet - All-in-One

Reviews: