Brother HL-L6400DW Online User'S Manual Download Page 286

Page: 286 / 382

Home >

Troubleshooting

Reset Functions

> Factory Reset

Factory Reset

Use the Factory Reset function to restore all settings back to the factory settings.

Unplug all the interface cables before you perform a Factory Reset.

>> HL-L6250DW
>> HL-L6400DW/HL-L6400DWT

HL-L6250DW

1. Press

to select the

[Reset Menu]

option, and then press

2. Press

to select the

[Factory Reset]

option, and then press

3. Press

to select

[Reset]

HL-L6400DW/HL-L6400DWT

1. Press

[Settings]

[Reset Menu]

[Factory Reset]

2. Press the option in the table to reset the machine or to exit the process.

Option Description

Yes

Reset the machine.

The machine will exit and cancel the reset menu.

3. You will be asked to reboot the machine. Press the option in the table to reboot the machine or to exit the

process.

Option

Description

Press

Yes

for 2 seconds Reboot the machine. The machine will begin the reset.

The machine will exit without rebooting.

If you do not reboot your machine, the reset process will not finish and your settings will remain unchanged.

4. Press

Related Information

•

Reset Functions

281

Summary of Contents for HL-L6400DW






























































































































































































































































































































































































Search results

Summary of Contents for HL-L6400DW

Reviews:

Brands by name

Popular brands

Brother HL-L6400DW, Online User'S Manual

Search results

Summary of Contents for HL-L6400DW

Reviews:

Brands by name

Popular brands