manualshive.com logo in svg

Brother HL 5370DW, Service Manual

Share
Download
Brother HL 5370DW Service Manual Download Page 2

Confidential

TRADEMARKS

The Brother logo is a registered trademark of Brother Industries, Ltd.
Apple and Macintosh are trademarks of Apple Inc., registered in the United States and other countries.
PCL is either a trademark or a registered trademark of Hewlett-Packard Company in the United States 
and other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United 
States and/or other countries.
Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft 
Corporation in the United States and/or other countries.
Linux is a registered trademark of Linus Torvalds in the United States and other countries.
PostScript and PostScript3 are either registered trademarks or trademarks of Adobe Systems 
Incorporated in the United States and/or other countries.
ENERGY STAR is a U.S. registered mark.
Citrix and MetaFrame are registered trademarks of Citrix Systems, Inc. in the United States.
Intel, Intel Xeon and Pentium are trademarks or registered trademarks of Intel Corporation.
AMD, AMD Athlon, AMD Opteron and combinations thereof, are trademarks of Advanced Micro 
Devices, Inc.
PictBridge is a trademark.
Each company whose software title is mentioned in this manual has a Software License Agreement 
specific to its proprietary programs.
All other trademarks are the property of their respective owners.

© Copyright Brother 2009

All rights reserved.
No part of this publication may be reproduced in any form or by any means without permission in writing 
from the publisher.
All other product and company names mentioned in this manual are trademarks or registered 
trademarks of their respective holders.
Specifications are subject to change without notice.

The function comparative table for models as described in this Service Manual are shown blow.

Model

HL-

5340D

HL-

5350DN

HL-

5350DNLT

HL-

5370DW

HL-

5370DWT

HL-

5380DN

Panel display

LED

LED

LED

LED

LED

LCD

Network

N/A

Wired

Wired

Wired/

Wireless

Wired/

Wireless

Wired

Lower Tray

N/A

N/A

Yes

N/A

Yes

N/A

Ethernet 10/100 
BASE-TX

N/A

Yes

Yes

Yes

Yes

Yes

Summary of Contents for HL 5370DW
































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands