Brother HL 5370DW Network User'S Manual Download

Page: 44 / 203

Wireless configuration for Windows

using the Brother automatic installer application (For HL-5370DW)

Choose the machine you wish to configure, and click

Next

. If the list is blank, check if the access point

and the machine are powered on, and then click

Refresh

Note

• The default node name is “BRNxxxxxxxxxxxx”.
• You can find your printer’s MAC Address (Ethernet Address) and the IP Address by printing out the

Printer Settings Page. See

Printing the Printer Settings Page

on page 117.

The wizard will search for wireless networks available from your machine. Choose the access point you

wish to associate the machine with, and then click

Next

Note

• “

SETUP

” is the default SSID of the machine. Do not choose this SSID.

• If the list is blank, check that the access point has power and is broadcasting the SSID, and then see if

the machine and the access point are within range for wireless communication. Then, click

Refresh

Summary of Contents for HL 5370DW












































































































































































































Search results

Summary of Contents for HL 5370DW

Reviews:

Related manuals for HL 5370DW

Brands by name

Popular brands

Brother HL 5370DW, Network User'S Manual

Search results

Summary of Contents for HL 5370DW

Reviews:

Related manuals for HL 5370DW

Brands by name

Popular brands